P2808
Pressure Control Solenoid G Performance/Stuck Off
Transmission
Generic OBD-II
Medium
What it means
P2808 means transmission pressure control solenoid G is not delivering the commanded hydraulic pressure — it is under-performing or stuck off. That upsets shift feel and clutch apply, so you may notice harsh or slipping shifts or a limp mode. Common causes are low or dirty fluid, a stuck solenoid or valve, or a wiring fault.
Medium
Can I keep driving? Usually yes but with caution — expect harsh or slipping shifts and possibly limp mode; prolonged slipping can damage the transmission, so get it checked soon.
Common symptoms
What you'll notice
- Check-engine light on
- Harsh, delayed, or slipping shifts
- Transmission stuck in one gear or in limp mode
- Reduced fuel economy from poor shift quality
Common causes
Most likely first
- Faulty pressure control solenoid G (stuck or weak)Likely
- Low or dirty transmission fluid restricting solenoid operationCommon
- Debris or varnish blocking the valve body passageCommon
- Open, shorted, or high-resistance solenoid wiring/connectorLess often
- Faulty transmission control module (less common)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and check transmission fluid level and condition first.
- Inspect the solenoid connector and harness for damage, corrosion, or loose pins.
- Measure solenoid resistance and command it with a scan tool to confirm response.
- Service or replace the valve body / pressure control solenoid if it is stuck or out of spec.
- Clear the code and road-test through all gears to confirm normal pressure and shifts.
FAQ
Quick answers
Is it safe to drive with P2808?+
Short trips may be fine, but harsh or slipping shifts can worsen and slipping damages clutches over time. Keep driving to a minimum until it is diagnosed.
Can I just clear P2808?+
It will return if the solenoid, fluid, or valve-body problem remains. Fix the underlying pressure-control fault first.
Related codes
Often seen with P2808
Read & clear P2808 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX