DOBD DashX ☰ Browse all codes
P2466

Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3

Exhaust temperature / emissions Generic OBD-II Medium

What it means

P2466 flags a fault in the exhaust gas temperature (EGT) sensor circuit for bank 2, sensor 3. EGT sensors track exhaust temperature to protect the turbo, catalytic converter, and β€” on diesels β€” the particulate filter. With this circuit faulted the ECM loses a reliable reading and may limit performance or regeneration, but the engine itself normally keeps running.

Medium

Can I keep driving? Usually drivable, but the ECM may limit power or diesel-filter regeneration to protect the exhaust β€” have it checked soon.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty exhaust gas temperature (EGT) sensor
  2. Open or short in the EGT sensor wiring
  3. Corroded or loose connector at the sensor
  4. Heat damage to the harness near the exhaust
  5. Rarely, an ECM fault

How to diagnose & fix

Work through it in order

  1. Scan for codes and record freeze-frame data.
  2. Inspect the EGT sensor connector and wiring near the exhaust for heat or corrosion damage.
  3. Measure the sensor's resistance or signal voltage and compare against specification.
  4. Check wiring continuity back to the ECM.
  5. Replace the EGT sensor if it is out of spec, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P2466?+
Usually yes short-term, but the ECM may cut power or skip diesel-filter regeneration, so get it repaired before soot builds up.
Can I just clear P2466?+
It will come back until the sensor or its wiring is repaired.

Related codes

Often seen with P2466

Read & clear P2466 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX