DOBD DashX ☰ Browse all codes
P0547

Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 1

Exhaust / emissions Generic OBD-II Medium

What it means

P0547 means the ECM has detected a problem in the circuit for the exhaust gas temperature (EGT) sensor on bank 2, sensor 1. This sensor monitors exhaust heat to protect the turbocharger and emissions hardware. It does not by itself make the engine run poorly, but a lost signal can trigger reduced power on turbo-diesel vehicles and raise emissions.

Medium

Can I keep driving? Usually drivable, but on turbo-diesel vehicles the ECM may cut power to protect the turbo and exhaust aftertreatment, so get it checked soon.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Failed exhaust gas temperature (EGT) sensor on bank 2, sensor 1
  2. Heat-damaged or chafed wiring near the exhaust
  3. Corroded or loose connector at the sensor
  4. ECM fault (rare)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data to confirm when the fault sets.
  2. Inspect the sensor and its harness near the exhaust for heat damage, chafing, or a loose connector.
  3. Measure the sensor's resistance/signal and compare against specification.
  4. Replace the EGT sensor if it reads out of range.
  5. If wiring and sensor check out, have the ECM circuit tested. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0547?+
Short trips are usually fine on gas engines. On turbo-diesels the EGT sensor protects the turbo and exhaust aftertreatment, so the vehicle may reduce power — get it fixed promptly.
Can I just clear P0547?+
It will return once the affected drive conditions repeat, because the sensor or its circuit is still faulty. Fix the cause first.

Related codes

Often seen with P0547

Read & clear P0547 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX