DOBD DashX ☰ Browse all codes
P0968

Pressure Control Solenoid C Control Circuit/Open

Transmission Generic OBD-II Medium

What it means

P0968 means the transmission control module has detected an open (broken) control circuit for pressure control solenoid C. That solenoid regulates hydraulic pressure for shifting, so when the circuit fails the transmission often shifts harshly or drops into a protective limp mode. It's usually a failed solenoid or a wiring/connector fault.

Medium

Can I keep driving? Often the transmission drops into a fixed-gear limp mode β€” you can usually drive gently to a shop, but harsh shifts or slipping mean you shouldn't keep driving on it.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Open circuit at pressure control solenoid C (failed solenoid coil)
  2. Broken or open wiring in the solenoid circuit
  3. Corroded or loose electrical connector
  4. Failed transmission control module (TCM)

How to diagnose & fix

Work through it in order

  1. Scan freeze-frame and note the conditions when the code set.
  2. Inspect the solenoid's wiring and connector for opens, damage, or corrosion.
  3. Measure the solenoid's resistance against spec; replace it if open or out of range.
  4. Repair wiring; internal solenoids may require dropping the pan and valve body.
  5. Retest; if the circuit and solenoid are good, have the TCM tested.

FAQ

Quick answers

Is it safe to drive with P0968?+
Only briefly and gently. The transmission usually enters limp mode; continued hard driving with slipping or harsh shifts can cause internal damage.
Can I just clear P0968?+
It will come back until the open circuit or failed solenoid is repaired β€” this is an electrical fault, not a passing glitch.

Related codes

Often seen with P0968

Read & clear P0968 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX