DOBD DashX ☰ Browse all codes
P0767

Shift Solenoid D Stuck On

Transmission (shift solenoid) Generic OBD-II Medium

What it means

P0767 means shift solenoid D is stuck in the "on" (applied) position and won't release. The transmission may hold the wrong gear, shift harshly, or refuse to change gears, and it often enters a failsafe mode. Debris in dirty fluid is a common cause of a physically stuck solenoid, alongside electrical faults and solenoid wear.

Medium

Can I keep driving? The car will still move but may shift harshly or hold the wrong gear; drive gently and repair soon, as running in the wrong gear can overheat the transmission.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Shift solenoid D stuck mechanically (debris or wear holding it applied)
  2. Electrical fault in the shift solenoid D circuit
  3. Contaminated transmission fluid or blocked valve-body passages
  4. Failed transmission control module (less common)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame and check transmission fluid level and condition.
  2. Inspect the solenoid D wiring and connector.
  3. Service dirty fluid and the filter; debris commonly sticks solenoids and valves.
  4. Test and replace shift solenoid D if it won't release.
  5. Inspect the valve body for stuck valves if the solenoid checks out.

FAQ

Quick answers

Is it safe to drive with P0767?+
Briefly, yes — but a stuck solenoid can hold the wrong gear and overheat the transmission, so limit driving until it's fixed.
Can I just clear P0767?+
If the solenoid is mechanically stuck it will set again quickly; sometimes a fluid and filter service frees a debris-stuck solenoid, but a worn one needs replacing.

Related codes

Often seen with P0767

Read & clear P0767 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX