DOBD DashX ☰ Browse all codes
P0294

Cylinder 12 Injector A Circuit Low

Fuel injection Generic OBD-II High

What it means

P0294 means the ECM detects a low-voltage (short-to-ground or open) condition in the electrical circuit for cylinder 12's fuel injector. This is a wiring/injector fault, not a fuel-pressure problem — when the injector can't switch properly, cylinder 12 misfires and the engine runs rough. Persistent misfiring risks catalytic-converter damage, so trace the circuit and injector promptly.

High

Can I keep driving? Driveable but rough — if cylinder 12's injector isn't firing you'll get a misfire, and sustained misfiring can damage the catalytic converter.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Short-to-ground or open in the cylinder-12 injector circuit
  2. Failed cylinder-12 fuel injector (open or shorted coil)
  3. Corroded or loose injector connector
  4. Chafed or damaged injector harness wiring
  5. Faulty injector driver in the ECM (least likely)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and inspect the cylinder-12 injector connector and wiring for a short to ground or open.
  2. Measure the injector coil resistance and compare to spec and the other injectors.
  3. Check for battery voltage and a switching ground at the connector with the key on.
  4. Replace the injector if the coil is open or shorted.
  5. Repair the harness or connector if the injector tests good. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0294?+
Only briefly. A dead injector means cylinder 12 misfires, dumping raw fuel that can overheat and destroy the catalytic converter. Fix it soon.
Can I just clear P0294?+
It returns immediately if the injector circuit is still faulty. The wiring or injector must be repaired first.

Related codes

Often seen with P0294

Read & clear P0294 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX