DOBD DashX ☰ Browse all codes
P002D

B Camshaft Profile Actuator A Control Circuit/Open Bank 2

Variable valve lift/timing Generic OBD-II High

What it means

P002D means the computer sees an open or faulty control circuit to the Bank 2 "B" camshaft profile actuator β€” the solenoid that switches the valve-lift/cam profile. It's an electrical fault in the solenoid, wiring, or connector. The affected bank may lose high-rpm power and run a little less smoothly, but the car still drives.

High

Can I keep driving? Safe to drive in the short term β€” you may notice less power at higher rpm and slightly rougher running; repair it to restore full valvetrain operation.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty camshaft profile control solenoid/actuator (Bank 2)
  2. Open or shorted wiring in the actuator control circuit
  3. Corroded or loose connector at the solenoid
  4. Oil supply/pressure problem to the actuator (dirty or low oil)
  5. ECM control-driver fault (least likely)

How to diagnose & fix

Work through it in order

  1. Inspect the actuator connector and wiring for damage or corrosion.
  2. Measure the solenoid's resistance and compare it to spec.
  3. Check the control wire for an open back to the ECM.
  4. Verify engine oil level and condition, since these actuators are oil-fed.
  5. Repair or replace the faulty part, clear the code, and road-test.

FAQ

Quick answers

Is it safe to drive with P002D?+
Yes β€” it generally just costs some smoothness and top-end power, not safety. Fix it so the valvetrain works fully and to avoid an emissions-test failure.
Can I just clear P002D?+
You can, but it returns once the ECM re-tests the circuit. Repair the solenoid or wiring first.

Related codes

Often seen with P002D

Read & clear P002D yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX