U0307
Software Incompatibility With Glow Plug Control Module 1
Communication network
Generic OBD-II
Medium
What it means
U0307 means the glow plug control module's software or calibration is incompatible with the vehicle. On diesels this manages cold-start preheating, so the main effect is hard or slow cold starting and possibly rough running until warm; a warm engine generally runs normally.
Medium
Can I keep driving? Usually yes once warm — the diesel runs, but cold starting may be hard until the glow plug control module software is corrected.
Common symptoms
What you'll notice
- Check-engine light on, often set right after a repair or reprogramming
- Hard or slow starting when cold
- Rough running or white smoke until the engine warms up
- Mismatched software or calibration version reported for the module
- The module works partially or not at all after a recent part change
Common causes
Most likely first
- The glow plug control module was replaced with a unit carrying the wrong or outdated software/calibrationLikely
- An interrupted or failed module reprogramming (flash)Common
- A replacement module with a part number that doesn't match the vehicle/VINCommon
- Corrupted module software after a power drop during an updateLess often
- An aftermarket tune or module not matched to the vehicle configurationLess often
How to diagnose & fix
Work through it in order
- Scan all modules and compare each module's software/calibration version and part number against the vehicle's build.
- If the glow plug control module was recently replaced, confirm it is the correct part for the VIN.
- Reprogram (reflash) the incompatible module with the correct, up-to-date calibration using a capable scan tool.
- Ensure a stable battery/charger during flashing so the update completes cleanly.
- If a proper reflash won't take, the module may be faulty or the wrong part — replace with the correct unit, program, and re-test.
FAQ
Quick answers
Is it safe to drive with U0307?+
Usually yes once warm — the diesel runs, but cold starting may be hard until the glow plug control module software is corrected.
Can I just clear U0307?+
Clearing won't help — the software mismatch is stored in the modules, so the code returns until the correct calibration is programmed.
Related codes
Often seen with U0307
Read & clear U0307 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX