U0305
Software Incompatibility With Cruise Control Module
Communication network
Generic OBD-II
Low
What it means
U0305 means the cruise control module's software or calibration is incompatible with the vehicle. Only the cruise control (and, on some vehicles, adaptive cruise) is affected — the engine, brakes and transmission drive normally.
Low
Can I keep driving? Yes — the car drives and brakes normally; only the cruise control system is affected until the module software is corrected.
Common symptoms
What you'll notice
- Check-engine light on, often set right after a repair or reprogramming
- Cruise control won't engage or drops out
- Mismatched software or calibration version reported for the module
- The module works partially or not at all after a recent part change
Common causes
Most likely first
- The cruise control module was replaced with a unit carrying the wrong or outdated software/calibrationLikely
- An interrupted or failed module reprogramming (flash)Common
- A replacement module with a part number that doesn't match the vehicle/VINCommon
- Corrupted module software after a power drop during an updateLess often
- An aftermarket tune or module not matched to the vehicle configurationLess often
How to diagnose & fix
Work through it in order
- Scan all modules and compare each module's software/calibration version and part number against the vehicle's build.
- If the cruise control module was recently replaced, confirm it is the correct part for the VIN.
- Reprogram (reflash) the incompatible module with the correct, up-to-date calibration using a capable scan tool.
- Ensure a stable battery/charger during flashing so the update completes cleanly.
- If a proper reflash won't take, the module may be faulty or the wrong part — replace with the correct unit, program, and re-test.
FAQ
Quick answers
Is it safe to drive with U0305?+
Yes — the car drives and brakes normally; only the cruise control system is affected until the module software is corrected.
Can I just clear U0305?+
Clearing won't help — the software mismatch is stored in the modules, so the code returns until the correct calibration is programmed.
Related codes
Often seen with U0305
Read & clear U0305 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX