P2710
Shift Solenoid F Intermittent
Transmission
Generic OBD-II
Medium
What it means
P2710 means shift solenoid 'F' is sending an intermittent or erratic signal — it works some of the time but drops out unexpectedly, often from a loose connector or a marginal solenoid. The result is harsh or erratic shifting and, in some cases, a temporary limp mode. The engine still starts and runs normally.
Medium
Can I keep driving? Usually drivable, but shifts may be harsh or erratic and the transmission can drop into limp mode. Get it checked soon.
Common symptoms
What you'll notice
- Check-engine light on
- Harsh, erratic, or delayed shifts
- Transmission slipping or shift shock
- Possible limp mode (stuck in one gear)
Common causes
Most likely first
- Low or dirty transmission fluidLikely
- Faulty shift solenoid FCommon
- Intermittent open or short in the solenoid wiring or connectorCommon
- Poor electrical connection at the transmission harnessLess often
- Faulty TCM/PCMLess often
How to diagnose & fix
Work through it in order
- Check transmission fluid level and condition.
- Inspect the solenoid wiring and connectors for intermittent faults (wiggle-test).
- Test shift solenoid F resistance and operation.
- Scan for companion shift-solenoid codes (P2707–P2709).
- Replace the solenoid or repair wiring as needed. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P2710?+
Short-term yes, but erratic shifting and limp mode are inconvenient and add wear. Repair it soon.
Can I just clear P2710?+
An intermittent fault will re-set the code. Find and fix the loose connection or solenoid.
Related codes
Often seen with P2710
Read & clear P2710 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX