DOBD DashX ☰ Browse all codes
P2536

Ignition Switch Accessory Position Circuit

Ignition switch / body wiring Generic OBD-II Low

What it means

P2536 sets when the computer sees a problem with the signal that tells it the ignition key is in the accessory (ACC) position. It's a switch-and-wiring fault, so the engine still starts and runs. The usual effect is incorrect accessory-power detection, sometimes affecting features that depend on knowing the key position, along with the warning light.

Low

Can I keep driving? Yes — the engine runs normally. This circuit reports the key's accessory position, so effects are usually limited to accessory power and a warning light.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty ignition switch or worn accessory-position contacts
  2. Wiring open or shorted in the accessory-position circuit
  3. Poor connection or corrosion at the switch or module
  4. Related power-relay or fuse fault

How to diagnose & fix

Work through it in order

  1. Check the fuses on the accessory/ignition circuits.
  2. Test the accessory-position signal as the key is turned through each position.
  3. Inspect wiring and connectors from the ignition switch to the module.
  4. Replace the ignition switch if the accessory contact is faulty.
  5. Clear the code and retest.

FAQ

Quick answers

Is it safe to drive with P2536?+
Yes. The engine is unaffected. The main symptom is incorrect accessory-position reporting, which can affect convenience features but not driving.
Can I just clear P2536?+
It returns if the switch or wiring is still faulty. Test the ignition switch circuit and repair it first.

Related codes

Often seen with P2536

Read & clear P2536 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX