DOBD DashX ☰ Browse all codes
P2515

A/C Refrigerant Pressure Sensor B Circuit

A/C / HVAC Generic OBD-II Low

What it means

P2515 means the ECM or HVAC module has detected a circuit problem with the 'B' A/C refrigerant pressure sensor. That sensor lets the system protect the compressor and control the cooling fans based on refrigerant pressure. The fault is electrical β€” the sensor, its wiring, or a connector β€” so the engine drives normally, but the air-conditioning may be disabled until it is repaired.

Low

Can I keep driving? Yes β€” the engine runs normally; you may just lose air-conditioning or see the cooling fans behave differently.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty A/C refrigerant pressure sensor 'B'
  2. Open, shorted, or chafed wiring in the sensor circuit
  3. Corroded or loose connector at the sensor
  4. Signal or reference voltage problem from the module

How to diagnose & fix

Work through it in order

  1. Scan and read freeze-frame data to see the fault conditions.
  2. Inspect the pressure sensor 'B' connector and wiring for damage or corrosion.
  3. Check the sensor's 5-volt reference and signal voltage at the connector.
  4. Replace the A/C refrigerant pressure sensor if the wiring is good.
  5. Verify system refrigerant charge once the circuit fault is resolved.

FAQ

Quick answers

Is it safe to drive with P2515?+
Yes. This is an A/C-system circuit fault, not an engine or safety issue. The main effect is that the A/C may not work and the cooling fans may run differently.
Can I just clear P2515?+
You can, but if the sensor or wiring is faulty it will come back and the A/C may stay disabled. Fix the circuit first.

Related codes

Often seen with P2515

Read & clear P2515 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX