DOBD DashX ☰ Browse all codes
P2407

EVAP System Leak Detection Pump Sense Circuit Intermittent/Erratic

Evaporative emissions (EVAP) Generic OBD-II Low

What it means

P2407 means the signal from the EVAP leak detection pump's sense circuit is intermittent or erratic. This is an emissions-monitoring fault — it won't change how the car drives, but it will keep the check-engine light on. Common causes are a loose or corroded connector, chafed wiring, or a failing leak detection pump.

Low

Can I keep driving? Safe to drive — this is an emissions-monitoring fault with no effect on how the car runs, though it will fail an emissions test.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty EVAP leak detection pump (LDP) sense circuit
  2. Intermittent open or short in the LDP sense wiring
  3. Corroded, loose, or chafed LDP connector
  4. Faulty leak detection pump assembly
  5. Poor ground or supply to the LDP

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and check whether the fault is currently active or intermittent.
  2. Wiggle-test the LDP connector and harness while watching live data for dropouts.
  3. Inspect the LDP sense wiring and connector for corrosion or chafing.
  4. Check the LDP's ground and power feeds.
  5. Replace the leak detection pump if the wiring is good, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P2407?+
Yes. It's purely an emissions-system monitor fault and doesn't affect drivability, but it should be repaired to pass emissions and turn off the light.
Can I just clear P2407?+
Because it's intermittent, it may stay off for a while but usually returns. Find the loose connection or failing pump to fix it for good.

Related codes

Often seen with P2407

Read & clear P2407 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX