P0915
Gear Shift Position Circuit A Range/Performance
Transmission controls
Generic OBD-II
Medium
What it means
P0915 means the gear-shift position sensor's signal is outside its expected range or not tracking the actual gear. On automated transmissions this can leave the car stuck in gear or in limp mode. The cause is usually the sensor, its wiring, or a shift actuator rather than internal damage. The engine still starts and runs.
Medium
Can I keep driving? Sometimes reduced — the transmission may get stuck in a gear or enter limp mode, so get it checked soon.
Common symptoms
What you'll notice
- Check-engine light on
- Difficulty shifting gears
- Transmission stuck in one gear or in limp mode
- Harsh shifting or slipping
Common causes
Most likely first
- Faulty gear shift position sensorLikely
- Wiring or connector fault in the circuitCommon
- Failed shift actuator or solenoidCommon
- Poor connection or groundLess often
- Faulty transmission control module (TCM) — least likelyLess often
How to diagnose & fix
Work through it in order
- Confirm the code and inspect the gear-shift position sensor and connector.
- Check the circuit wiring and ground for damage or corrosion.
- Compare the sensor's signal to actual gear position against spec.
- Test the shift actuator/solenoid operation.
- Replace the sensor or actuator if confirmed faulty. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0915?+
The engine runs, but the transmission may get stuck in gear or enter limp mode. Get it checked soon, especially if shifting is difficult.
Can I just clear P0915?+
It returns until the sensor, wiring, or actuator fault is repaired.
Related codes
Often seen with P0915
Read & clear P0915 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX