DOBD DashX ☰ Browse all codes
P0828

Up and Down Shift Switch Circuit High

Transmission controls Generic OBD-II Low

What it means

P0828 means the transmission control module sees an abnormally high voltage on the driver-operated up/down (manual or Tiptronic) shift switch circuit. It usually points to a fault in that switch or its wiring, not the transmission itself. The car still drives in automatic β€” typically only manual gear selection is affected.

Low

Can I keep driving? Yes β€” the car still drives normally in automatic; usually only the manual up/down shift buttons stop responding.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty up/down shift switch (steering-wheel paddle or console switch)
  2. Damaged wiring or connector in the shift-switch circuit (short to voltage or open)
  3. Corroded or loose connections at the switch
  4. Failed transmission control module (TCM) β€” least likely

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and confirm the code; check for related shift-switch codes.
  2. Inspect the up/down shift switch and its connector for damage or corrosion.
  3. Test the circuit wiring for a short to voltage or an open against the switch's spec.
  4. Replace the shift switch if it fails its test.
  5. If wiring and switch check out, have the TCM evaluated. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0828?+
Generally yes. The transmission still shifts on its own in automatic; usually only the manual up/down selection is affected. Get it fixed at your convenience.
Can I just clear P0828?+
You can, but it returns until the shift switch or its wiring is repaired.

Related codes

Often seen with P0828

Read & clear P0828 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX