P0810
Clutch Position Control Error
Transmission
Generic OBD-II
Medium
What it means
P0810 means the control module sees a mismatch between the commanded and actual clutch position, so the clutch may not engage or disengage as expected. On cars with an automated or dual-clutch transmission this shows up as hard shifts, slipping, or jerky take-up. Common causes are the clutch position sensor, its wiring, the clutch actuator, or a worn clutch.
Medium
Can I keep driving? Often drivable, but the clutch may not engage or disengage cleanly, causing hard shifts or slipping — repair soon, and be ready for reduced shift quality.
Common symptoms
What you'll notice
- Difficulty shifting gears
- Clutch slipping or failing to engage/disengage cleanly
- Jerky or delayed take-up from a stop
- Reduced power or poor acceleration
- Check-engine light on
Common causes
Most likely first
- Faulty clutch position sensor or out-of-range readingLikely
- Damaged wiring or corroded connectors in the clutch position circuitCommon
- Faulty clutch actuator (on automated/dual-clutch systems)Common
- Worn clutch disc or pressure plateLess often
- Low or contaminated clutch/transmission fluidLess often
- Failed transmission control module (TCM)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and compare the clutch position reading with the actual clutch state.
- Inspect the clutch position sensor connector and wiring for damage or corrosion.
- Test the sensor's output across its range and replace it if out of spec.
- On automated/dual-clutch transmissions, check the clutch actuator and perform any required clutch adaptation/relearn.
- Check fluid level and inspect the clutch for wear; repair or replace worn components. Clear and road-test.
FAQ
Quick answers
Is it safe to drive with P0810?+
Usually for short trips, but poor clutch engagement can worsen and stress the driveline, so have it diagnosed soon.
Can I just clear P0810?+
You can, but if the sensor, actuator, or clutch is at fault the error returns, often with the same shifting problems.
Related codes
Often seen with P0810
Read & clear P0810 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX