P076B
Shift Solenoid H Performance/Stuck Off
Transmission — shift control
Generic OBD-II
Medium
What it means
P076B means shift solenoid H is performing poorly or staying off, so the gear it controls does not engage cleanly. It is usually felt as rough or missed shifting. The engine still starts and runs; the fault is in the shift solenoid, its circuit, or the fluid and valve body that operate it.
Medium
Can I keep driving? You can usually drive gently, but rough or missed shifting means the transmission is not operating normally — have it checked soon.
Common symptoms
What you'll notice
- Check-engine light on
- Rough or harsh gear shifting
- Delayed or missed shifts
Common causes
Most likely first
- Faulty shift solenoid HLikely
- Low or contaminated transmission fluidCommon
- Poor electrical connection at the solenoidCommon
- Sticking or worn valve bodyLess often
- Failed transmission control module (TCM) — least commonLess often
How to diagnose & fix
Work through it in order
- Confirm the code and check fluid level and condition first.
- If the fluid is burnt or full of debris, drop the pan and inspect.
- Inspect the solenoid H wiring and connector for damage or corrosion.
- Test and replace the solenoid if faulty; service the valve body if needed.
- Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P076B?+
Gentle short-distance driving is usually okay, but rough shifting stresses the transmission — get it checked soon.
Can I just clear P076B?+
It returns until the solenoid, fluid, or valve-body issue is repaired.
Related codes
Often seen with P076B
Read & clear P076B yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX