P0760
Shift Solenoid C
Transmission
Generic OBD-II
Medium
What it means
P0760 flags an electrical fault in the shift solenoid C circuit. This solenoid directs hydraulic pressure to engage a gear, so a fault can cause the transmission to skip a shift, stick in one gear, or shift harshly. The usual causes are a failed solenoid, wiring or connector problems, or low/contaminated transmission fluid.
Medium
Can I keep driving? The car will usually still drive but may shift roughly or stick in a gear — okay for short trips, but repair it before it stresses the transmission.
Common symptoms
What you'll notice
- Check-engine light on
- Failure to shift into the expected gear
- Transmission stuck in one gear or limp mode
- Delayed or harsh shifting
- Reduced fuel economy
Common causes
Most likely first
- Failed shift solenoid CLikely
- Wiring or connector fault in the solenoid circuitCommon
- Loose or corroded electrical connectionsCommon
- Low or contaminated transmission fluidLess often
- Failed transmission control module (TCM)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and check transmission fluid level and condition first.
- Inspect the solenoid connector and wiring for corrosion, chafing, or loose pins.
- Test shift solenoid C resistance and operation; replace if faulty.
- Clean or repair any loose or corroded connections in the circuit.
- If the solenoid and wiring are good, evaluate the TCM. Clear and road-test.
FAQ
Quick answers
Is it safe to drive with P0760?+
Short trips are usually fine, but the transmission may be stuck in a gear or shifting harshly. Repair it soon to avoid extra wear.
Can I just clear P0760?+
It will return the next time solenoid C is commanded and fails. Clearing only resets the light temporarily.
Related codes
Often seen with P0760
Read & clear P0760 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX