DOBD DashX ☰ Browse all codes
P0468

EVAP Purge Flow Sensor Circuit High

EVAP / emissions Generic OBD-II Low

What it means

P0468 means the EVAP purge flow sensor is reporting a higher-than-normal voltage. This sensor tracks how much fuel vapor is drawn from the charcoal canister into the engine. It's an emissions and vapor-management fault β€” you may notice a faint fuel smell or a failed emissions test, but the engine still starts and drives normally.

Low

Can I keep driving? Yes β€” it's an emissions and vapor-management fault; the car drives and starts normally, though expect a failed emissions test until it's repaired.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty EVAP purge flow sensor
  2. Wiring or connector fault in the sensor circuit (short-to-voltage or open)
  3. Malfunctioning EVAP canister purge solenoid
  4. Blockage or restriction in the EVAP purge path
  5. ECM fault (rare)

How to diagnose & fix

Work through it in order

  1. Scan freeze-frame data, then inspect the purge flow sensor connector and wiring for shorts, opens, or corrosion.
  2. Test the purge solenoid operation and check the purge line for blockage or restriction.
  3. Compare the sensor's signal to spec and replace the sensor if it reads out of range.
  4. If wiring, solenoid, and sensor all check out, have the ECM evaluated. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0468?+
Yes. This is an emissions and vapor-management code, not a mechanical fault β€” the engine still starts and drives normally. You'll just fail an emissions test until it's fixed.
Can I just clear P0468?+
It will return once the EVAP monitor runs again unless the sensor or circuit fault is repaired. Check the wiring and connector first.

Related codes

Often seen with P0468

Read & clear P0468 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX