P0392
Camshaft Position Sensor B Circuit Low Bank 2
Camshaft position sensor
Generic OBD-II
High
What it means
P0392 means the engine computer sees a low signal from the 'B' camshaft position sensor circuit on bank 2, usually from a short to ground or a wiring fault. This sensor reports camshaft position for fuel and spark timing, so the fault can cause hard starting, rough running, and on some engines stalling or a no-start.
High
Can I keep driving? Often drivable, but a low/lost cam signal can cause hard starting, stalling, or a no-start on some engines — repair it promptly.
Common symptoms
What you'll notice
- Check-engine light on
- Hard starting or extended cranking
- Rough idle, hesitation, or stalling
- Reduced power on acceleration
Common causes
Most likely first
- Failed camshaft position sensor 'B' (bank 2)Likely
- Signal circuit shorted to ground, giving a low readingCommon
- Damaged wiring or a poor/corroded connector in the circuitCommon
- Metal debris on the sensor tip or a damaged reluctor/timing wheelLess often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and inspect the cam-sensor connector and wiring for a short to ground, oil intrusion, or corrosion.
- Check the sensor tip for debris and confirm the reluctor ring is intact.
- Measure the sensor's signal voltage, power, and ground while cranking.
- Replace the camshaft position sensor if testing confirms it. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0392?+
It may run, but a failing cam signal can cause stalling or a no-start without warning, so have it repaired soon.
Can I just clear P0392?+
You can, but it returns until the sensor or its wiring is repaired.
Related codes
Often seen with P0392
Read & clear P0392 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX