DOBD DashX ☰ Browse all codes
P0375

Timing Reference High Resolution Signal B

Ignition / timing reference Generic OBD-II High

What it means

P0375 means the engine computer has detected a problem with the 'B' high-resolution timing-reference signal β€” the fine-grained crank/cam signal it uses to time spark and fuel precisely. A fault here can cause misfires, hard starting, or stalling, and usually traces to the sensor, its wiring, or the timing wheel.

High

Can I keep driving? Risky β€” the ECM uses this timing-reference signal for spark and fuel timing, so a fault can cause misfires, stalling, or a no-start. Repair before relying on the vehicle.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty crankshaft/camshaft timing-reference sensor
  2. Damaged wiring or a poor connector in the signal circuit
  3. Damaged reluctor/timing wheel or incorrect sensor air gap
  4. Worn or jumped timing chain/belt affecting the reference signal

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and inspect the sensor connector and wiring for damage or corrosion.
  2. Check the sensor air gap, mounting, and the reluctor wheel for damage or debris.
  3. Test the timing-reference signal with a scope or meter while cranking.
  4. If the signal is intermittent under load, verify timing-chain/belt condition. Replace the sensor if confirmed, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0375?+
Not really β€” a dropout in the timing-reference signal can cause a sudden misfire or stall. Address it promptly.
Can I just clear P0375?+
You can, but if the signal is genuinely faulty the code returns and driveability problems continue until it's fixed.

Related codes

Often seen with P0375

Read & clear P0375 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX