P0367
Camshaft Position Sensor B Circuit Low Bank 1
Ignition / cam & crank
Generic OBD-II
High
What it means
P0367 means the second camshaft position sensor on bank 1 is producing a signal below its normal voltage range, usually from a failed sensor or a wiring short to ground. The ECM relies on cam position to time fuel and spark, so a low or lost signal can cause hard starting, stalling, and rough running.
High
Can I keep driving? May be hard to start, stall, or run rough, and can occasionally fail to start; have it diagnosed before relying on the vehicle.
Common symptoms
What you'll notice
- Check-engine light on
- Hard starting or intermittent stalling
- Rough idle
- Reduced power or acceleration
Common causes
Most likely first
- Faulty camshaft position sensor 'B' with low outputLikely
- Wiring shorted to ground or open in the sensor circuitCommon
- Loose or corroded connector at the sensorCommon
- Damaged reluctor/tone wheel or debris on the sensor tipLess often
- Failed ECM (rare)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and check for related cam or crank sensor codes.
- Inspect the cam sensor 'B' connector and wiring for a short to ground, open, or corrosion.
- Check the sensor tip and tone wheel for debris or damage.
- Measure the sensor's signal and reference voltages against spec.
- Replace the sensor if the circuit reads low. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0367?+
Drive with caution. The engine may stall or be hard to start. Get it diagnosed promptly so you aren't stranded.
Can I just clear P0367?+
It returns while the circuit still reads low. Fix the sensor or wiring first, then clear and re-test.
Related codes
Often seen with P0367
Read & clear P0367 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX