DOBD DashX ☰ Browse all codes
P0317

Rough Road Hardware Not Present

Misfire monitoring / configuration Generic OBD-II Low

What it means

P0317 means the engine computer's misfire monitor expects rough-road data β€” used to tell a real misfire apart from crank-speed changes caused by potholes β€” but that hardware or data isn't present. It's usually a configuration, calibration, or wiring issue rather than an engine fault, so the car typically drives normally.

Low

Can I keep driving? Fine to drive β€” this is a diagnostic/configuration code and does not by itself affect how the engine runs.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. PCM configured to expect a rough-road (G) sensor the vehicle doesn't have β€” programming or calibration mismatch
  2. Rough-road sensor missing, unplugged, or its data not reaching the PCM
  3. Loss of ABS / wheel-speed data on the bus that the PCM uses to detect rough road
  4. Wiring or connector fault in the rough-road sensor circuit

How to diagnose & fix

Work through it in order

  1. Confirm the correct calibration/software is loaded for this vehicle β€” a mismatch after a module swap or reflash is a common trigger.
  2. Check whether the vehicle is equipped with a rough-road sensor and that it is connected.
  3. Verify ABS/wheel-speed data is present on the network (no related ABS codes).
  4. Inspect the sensor wiring and connectors, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0317?+
Yes. It relates to how the computer filters out road-bump-induced misfire readings, not to a mechanical fault.
Can I just clear P0317?+
It will return if the configuration mismatch or missing sensor data remains. Fix the underlying cause first.

Related codes

Often seen with P0317

Read & clear P0317 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX