DOBD DashX ☰ Browse all codes
P0287

Cylinder 9 Contribution/Balance

Fuel injection / cylinder balance Generic OBD-II High

What it means

P0287 means cylinder 9 isn't contributing its fair share of power compared with the other cylinders — the ECM measures it running weak. This usually points to a fuel-delivery problem at that cylinder (a clogged or failing injector) or low compression. The engine runs rough and down on power, but it's a single-cylinder issue rather than a whole-engine failure.

High

Can I keep driving? Drivable but rough — cylinder 9 is running weak, so expect a shaky idle and lost power; fix it before it worsens.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Clogged, weak, or failing fuel injector on cylinder 9
  2. Injector wiring or connector fault on cylinder 9
  3. Low compression on cylinder 9 (valve or ring wear)
  4. Faulty glow plug on cylinder 9 (diesel engines)
  5. Restricted fuel supply or a failed PCM injector driver (rare)

How to diagnose & fix

Work through it in order

  1. Scan and read freeze-frame data; run a cylinder contribution/balance test to confirm cylinder 9 is weak.
  2. Inspect the injector wiring and connector on cylinder 9.
  3. Test the injector's resistance and spray; clean or replace it if it's clogged or weak.
  4. Run a compression test on cylinder 9 (and check the glow plug on diesels) to rule out a mechanical cause.
  5. If injector and compression are good, check fuel supply and the PCM driver. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0287?+
Briefly, yes, but a weak cylinder makes the engine run rough and can lead to misfires. Have it repaired soon.
Can I just clear P0287?+
It returns within a few drive cycles until the injector, compression, or fuel-supply issue on cylinder 9 is fixed.

Related codes

Often seen with P0287

Read & clear P0287 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX