DOBD DashX ☰ Browse all codes
U0330

Software Incompatibility With Tire Pressure Monitor Module

Network / communication Generic OBD-II Low

What it means

U0330 sets when the tire pressure monitor (TPMS) module runs software that doesn't match the rest of the network β€” usually after a module swap or an interrupted update. You'll lose reliable tire-pressure warnings, so check pressures manually, but the engine, brakes, and steering are unaffected and the car is safe to drive.

Low

Can I keep driving? Yes β€” only tire-pressure monitoring is affected; the powertrain, brakes, and steering work normally, so check tire pressures manually until it's fixed.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Tire pressure monitor module software doesn't match the network software level
  2. Replacement or used TPM module installed without correct programming
  3. Interrupted reflash or incomplete module setup
  4. Coding out of sync after a related body module was reprogrammed

How to diagnose & fix

Work through it in order

  1. Scan all modules and confirm which software/part numbers are mismatched.
  2. Verify the TPM module part number is correct for this VIN and sensor type.
  3. Reflash or recode the module to the manufacturer-approved software level.
  4. Perform a TPMS sensor relearn if needed, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with U0330?+
Yes. Only tire-pressure monitoring is affected β€” nothing about how the car drives or stops. Just check your tire pressures with a gauge until the system is restored.
Can I just clear U0330?+
It comes back until the software matches. The TPM module needs to be reprogrammed to the correct level to clear it permanently.

Related codes

Often seen with U0330

Read & clear U0330 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX