DOBD DashX ☰ Browse all codes
U0202

Lost Communication With Door Control Module D

Door module network Generic OBD-II Low

What it means

U0202 means the network has lost communication with door control module D, which runs one door's powered features such as the windows, locks, and mirror. Losing it leaves those functions dead but does not affect the engine or safety systems. The most common cause is a broken wire in the flexible harness at the door hinge, along with connector faults, power/ground problems, or a failed module.

Low

Can I keep driving? Yes — this affects one door's powered features such as windows, locks, and mirror; the car drives and runs normally.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Wiring break in the door harness, often at the flexible door-jamb loom
  2. Poor power or ground to the door module
  3. CAN bus fault interrupting the module
  4. Failed door control module

How to diagnose & fix

Work through it in order

  1. Scan for related U-codes and confirm which door module is offline.
  2. Flex-test and inspect the door-jamb wiring harness for broken wires.
  3. Check the module's power, ground, and connector.
  4. Confirm bus communication to the module.
  5. Repair the wiring or replace the door module, clear codes, and retest.

FAQ

Quick answers

Is it safe to drive with U0202?+
Yes. This affects the powered features of one door and has no impact on how the vehicle drives or on any safety system.
Can I just clear U0202?+
It returns until the module communicates again. A very common cause is broken wiring in the flexible loom at the door hinge, which flexes every time the door opens, so inspect there first.

Related codes

Often seen with U0202

Read & clear U0202 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX