Lost Communication With Side Restraints Control Module - Right
What it means
U0153 means the restraints system has lost communication with the right-side restraints control module β the controller for the passenger-side airbags and side restraint devices. It turns on the airbag warning light and can disable right-side deployment, so the protection may not work in a crash even though the car drives normally. It is usually caused by a wiring or connector fault, a lost power or ground feed, or a failed module, and should be treated as a safety-priority repair.
Can I keep driving? The car drives, but the airbag light is on and the right-side restraints may not deploy in a crash β a real safety risk, so repair it promptly.
Common symptoms
What you'll notice
- Airbag / SRS warning light on
- Right-side airbag or restraint function disabled
- The right side restraints control module unresponsive to a scan tool
- Intermittent SRS fault, sometimes after a jolt or over rough roads
Common causes
Most likely first
- Damaged, corroded, or disconnected wiring or connector at the moduleLikely
- Lost power or ground feed to the right side restraints moduleCommon
- CAN bus fault between the module and the main restraints controllerCommon
- Failed side restraints control moduleLess often
- Water intrusion at the module, often mounted low in the door sill or B-pillarLess often
How to diagnose & fix
Work through it in order
- Scan the SRS system and confirm whether the right side restraints module responds.
- Check power and ground at the module and any dedicated fuse.
- Inspect the module's connector and wiring for corrosion, damage, or water, especially in the sill area.
- Check the bus circuits between the module and the restraints controller for opens or shorts.
- If power and wiring are good but the module stays silent, replace it, then clear and re-test with a proper SRS scan tool.
FAQ
Quick answers
Is it safe to drive with U0153?+
Can I just clear U0153?+
Related codes
Often seen with U0153
Read & clear U0153 yourself
Scan your car, confirm the code, and clear it once it's fixed β with OBD DashX on your phone.