DOBD DashX ☰ Browse all codes
P2754

Transmission Fluid Cooler Control Circuit Low

Automatic transmission (cooling) Generic OBD-II Medium

What it means

P2754 means the control module has detected low voltage (typically a short to ground) in the transmission fluid cooler control circuit. This circuit manages active cooling of the transmission fluid, so a fault mainly risks the fluid running hotter than normal under load — the engine and transmission still operate, but overheating over time can cause damage.

Medium

Can I keep driving? Drivable, but the transmission cooler control may not work, risking overheating under heavy load. Avoid towing until fixed.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Short to ground in the transmission fluid cooler control circuit
  2. Faulty cooler control valve, bypass valve, or actuator
  3. Open, damaged, or corroded wiring or connector
  4. Poor ground or a fault in the control module driver

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and inspect the cooler control circuit wiring and connector for a short to ground or damage.
  2. Check the cooler control valve/actuator operation when commanded with a scan tool.
  3. Verify supply voltage and ground at the actuator.
  4. Repair wiring or replace the control valve/actuator as indicated, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P2754?+
Light driving is usually okay, but the cooler control may be inactive, so avoid towing or heavy load that could overheat the transmission until it's fixed.
Can I just clear P2754?+
It will return until the circuit fault or control valve problem is repaired.

Related codes

Often seen with P2754

Read & clear P2754 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX