DOBD DashX ☰ Browse all codes
P2736

Pressure Control Solenoid F Control Circuit/Open

Transmission Generic OBD-II Medium

What it means

P2736 means the transmission control module detected an open in the control circuit for pressure control solenoid "F," a valve that regulates shift hydraulic pressure. With the circuit open the solenoid can't be commanded, so the transmission often shifts harshly or drops into limp mode. It's typically a wiring, connector, or solenoid fault, not an engine problem.

Medium

Can I keep driving? May shift harshly or drop into limp mode with the circuit open β€” the engine starts and runs fine, but drive gently to a shop.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Open in the pressure control solenoid F control circuit
  2. Disconnected, corroded, or damaged solenoid connector
  3. Faulty pressure control solenoid F
  4. Internal transmission harness fault
  5. Faulty TCM/PCM driver (rare)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame; confirm an open on the pressure control solenoid F control circuit.
  2. Inspect the solenoid connector and wiring for opens or corrosion.
  3. Measure solenoid resistance and check continuity back to the module.
  4. Inspect the internal transmission harness.
  5. Replace the solenoid or repair the circuit; clear and retest.

FAQ

Quick answers

Is it safe to drive with P2736?+
The engine runs fine, but with the solenoid circuit open the transmission can't control that pressure, so it may shift harshly or enter limp mode. Drive gently to a shop and skip towing until repaired.
Can I just clear P2736?+
An open circuit won't reset itself β€” the code returns immediately until the wiring, connector, or solenoid is repaired.

Related codes

Often seen with P2736

Read & clear P2736 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX