DOBD DashX ☰ Browse all codes
P2669

Actuator Supply Voltage B Circuit /Open

PCM actuator power supply Generic OBD-II Medium

What it means

P2669 means the PCM detected an open or missing voltage on the 'B' actuator supply circuit — a power feed the controller sends to a group of output actuators. If those actuators lose power, the engine can run poorly or, depending on what's on the circuit, stall. It's usually a blown fuse, open wiring, or a bad connector rather than the PCM itself.

Medium

Can I keep driving? Cautiously — an open actuator power feed can make the engine run poorly or, depending on what it powers, stall; have it checked promptly.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Blown fuse feeding the actuator supply circuit
  2. Open or shorted actuator supply wiring
  3. Corroded or loose connector on the supply circuit
  4. Poor ground or failed supply relay
  5. PCM fault (least likely)

How to diagnose & fix

Work through it in order

  1. Check the fuse and power feed for the 'B' actuator supply circuit.
  2. Inspect the supply wiring and connectors for opens, corrosion, or chafing.
  3. Measure supply voltage at the affected actuators with the key on.
  4. Check the associated relay and grounds.
  5. Repair wiring/fuse first; consider the PCM only after the circuit checks out.

FAQ

Quick answers

Is it safe to drive with P2669?+
Be cautious. This circuit powers engine actuators, so depending on what's affected the engine may run poorly or stall. Get it diagnosed before relying on the vehicle.
Can I just clear P2669?+
You can, but an open feed or blown fuse will set it again, often with other actuator codes. Find and fix the power-circuit fault instead.

Related codes

Often seen with P2669

Read & clear P2669 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX