DOBD DashX ☰ Browse all codes
P2583

Cruise Control Front Distance Range Sensor Single Sensor or Center

Adaptive cruise control Generic OBD-II Low

What it means

P2583 means the front distance (radar) sensor used by adaptive cruise control isn't reporting a valid range — commonly because it's blocked, dirty, misaligned, or faulty. It disables the follow-distance feature but doesn't affect engine performance or normal braking. Many vehicles need a calibration procedure after the sensor is cleaned or replaced.

Low

Can I keep driving? Fine to drive — the engine and normal brakes work as usual. Adaptive cruise control will likely be disabled until the front distance sensor is repaired.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Blocked, dirty, iced, or misaligned front radar/distance sensor
  2. Faulty front distance range sensor
  3. Wiring or connector fault at the sensor
  4. Sensor calibration/aiming lost after a repair or impact

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and confirm the fault is the front distance sensor.
  2. Clean the sensor face and clear any obstruction (badge, ice, mud, aftermarket cover).
  3. Inspect the sensor mounting and alignment for impact damage or shift.
  4. Check the sensor connector and wiring for damage or corrosion.
  5. Perform the manufacturer's sensor calibration/aiming, or replace the sensor if faulty, then re-test.

FAQ

Quick answers

Is it safe to drive with P2583?+
Yes. Only the adaptive cruise/distance feature is affected; the engine and normal brakes are unaffected. Just don't rely on adaptive cruise until it's fixed.
Can I just clear P2583?+
It will return if the sensor is blocked, misaligned, or faulty. Many vehicles also require a calibration procedure before the feature works again.

Related codes

Often seen with P2583

Read & clear P2583 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX