DOBD DashX ☰ Browse all codes
P0941

Hydraulic Oil Temperature Sensor Circuit Intermittent

Transmission / hydraulic control Generic OBD-II Low

What it means

P0941 means the hydraulic (transmission) oil temperature sensor circuit is dropping out intermittently. That sensor reports fluid temperature so the controller can adapt shift timing and pressure. An intermittent signal usually points to a loose or damaged connection rather than a hard failure, so symptoms come and go.

Low

Can I keep driving? Safe to drive short-term; the transmission may occasionally shift oddly or log the fault intermittently — repair to avoid nuisance limp-mode events.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Loose or corroded connections in the temperature sensor circuit
  2. Damaged or chafed wiring/harness (the usual cause of an intermittent fault)
  3. Faulty hydraulic oil temperature sensor
  4. Faulty transmission control module (less common)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data, then wiggle-test the connector and harness while watching live data for dropouts.
  2. Inspect the wiring and connector for corrosion, chafing, or loose pins; repair as needed.
  3. Test the sensor's resistance across a temperature range against specification.
  4. Replace the sensor if it fails; check for a module software update only after wiring and sensor test good. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0941?+
Generally yes for the short term. The main risk is occasional odd shifting or a brief limp event, so fix it at your convenience.
Can I just clear P0941?+
It clears, but an intermittent wiring fault will set it again. Track down the loose connection first.

Related codes

Often seen with P0941

Read & clear P0941 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX