P0895
Shift Time Too Short
Transmission controls
Generic OBD-II
Medium
What it means
P0895 means the transmission completed a gear shift faster than the programmed time, which the controller reads as a fault. It usually points to shift solenoids, hydraulic pressure, or worn internal components rather than an electrical sensor. The engine starts and drives, but the harsh, quick shifts it causes can accelerate transmission wear if left unaddressed.
Medium
Can I keep driving? Usually — but harsh, abrupt shifts can accelerate internal wear, so have it checked before it worsens.
Common symptoms
What you'll notice
- Check-engine light on
- Harsh or abrupt gear changes
- Slipping or jerking during shifts
- Unusual noises during shifts
- Possible transmission overheating
Common causes
Most likely first
- Sticking or malfunctioning shift solenoids / valvesLikely
- Low or fluctuating hydraulic (line) pressureCommon
- Low or degraded transmission fluidCommon
- Worn internal clutches or bandsLess often
- Electrical or wiring fault within the transmissionLess often
- Faulty transmission control module (TCM) — least likelyLess often
How to diagnose & fix
Work through it in order
- Check transmission fluid level and condition first.
- Read freeze-frame data to see the conditions when the fault set.
- Test the shift solenoids and line pressure against spec.
- Inspect internal wiring and connectors for faults.
- If solenoids and pressure are good, inspect for internal clutch/band wear. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0895?+
The car drives, but the harsh, quick shifts it flags can speed up transmission wear. Have it checked before the problem grows.
Can I just clear P0895?+
It returns until the solenoid, pressure, or internal wear issue is addressed. Check the fluid first.
Related codes
Often seen with P0895
Read & clear P0895 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX