DOBD DashX ☰ Browse all codes
P0880

TCM Power Input Signal

Transmission / TCM power supply Generic OBD-II Medium

What it means

P0880 means the transmission control module isn't receiving the steady power input signal it needs to operate. Because the TCM manages all shifting, an interrupted or unstable supply can leave the transmission stuck in gear or in limp mode. The engine still starts and runs β€” the engine control module has its own supply β€” so this is a transmission power-feed fault.

Medium

Can I keep driving? The engine starts, but the transmission may lose shift control or drop into limp mode β€” have it checked promptly.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Damaged or broken wiring in the TCM power input circuit
  2. Corroded or loose electrical connectors
  3. Weak battery or charging-system voltage
  4. Failed transmission control module (rare)

How to diagnose & fix

Work through it in order

  1. Test battery and charging-system voltage first β€” low system voltage can trigger this code.
  2. Read freeze-frame data and inspect the TCM power feed wiring, grounds, and connectors for damage or corrosion.
  3. Check the relevant fuses and confirm steady supply voltage reaches the TCM.
  4. Repair the power and ground circuits; replace the TCM only if it fails to receive correct voltage with wiring confirmed good. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0880?+
The engine runs, but an unstable power feed to the TCM can cause sudden loss of shifting, so limit driving until it's diagnosed.
Can I just clear P0880?+
It will clear, but returns whenever the TCM's power input drops out of range until the wiring or supply fault is fixed.

Related codes

Often seen with P0880

Read & clear P0880 yourself

Scan your car, confirm the code, and clear it once it's fixed β€” with OBD DashX on your phone.

β–Ά Get it on Google Play
βœ“ Verified name β€” SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX