DOBD DashX ☰ Browse all codes
P083E

Transmission Fluid Pressure Sensor/Switch G Circuit Intermittent

Transmission / fluid pressure Generic OBD-II Medium

What it means

P083E means the transmission fluid pressure sensor/switch "G" is sending an intermittent or erratic signal to the controller. The engine starts and runs normally, but because the module briefly loses an accurate pressure reading, shifts can feel rough or the transmission may momentarily slip. Start with the fluid level and the sensor wiring.

Medium

Can I keep driving? Usually driveable, but shifts may occasionally feel rough or slip; have it checked before the fault becomes constant.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Low or dirty transmission fluid
  2. Intermittent open/short in the pressure sensor wiring or connector
  3. Faulty transmission fluid pressure sensor/switch (G)
  4. Sticking pressure control solenoid or valve-body issue

How to diagnose & fix

Work through it in order

  1. Check transmission fluid level and condition first; top up or service if low or burnt.
  2. Inspect the pressure sensor connector and wiring, flexing the harness to reveal an intermittent fault.
  3. Monitor the pressure sensor signal on a scan tool during driving to catch the dropout.
  4. Repair wiring, then replace the pressure sensor/switch if the intermittent signal persists. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P083E?+
Short-term yes, but an intermittent pressure fault can turn into consistent shifting problems. Check the fluid and get it diagnosed soon.
Can I just clear P083E?+
Because it is intermittent it may stay off for a while, but it returns until the root cause is fixed.

Related codes

Often seen with P083E

Read & clear P083E yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX