DOBD DashX ☰ Browse all codes
P075E

Shift Solenoid G Intermittent

Transmission / shift controls Generic OBD-II Medium

What it means

P075E means the transmission control module detects an intermittent electrical fault in the shift solenoid G circuit. Because the solenoid signal cuts in and out, gear changes can be rough or erratic and the transmission may briefly enter limp mode. Intermittent faults like this usually trace to a loose connector or chafed wiring, not the solenoid itself.

Medium

Can I keep driving? Usually drivable, but shifts may be rough or erratic and the transmission can drop into limp mode — have it fixed to prevent added wear.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Loose or corroded connector at shift solenoid G
  2. Chafed or intermittent wiring in the solenoid circuit
  3. Failing shift solenoid G
  4. Low or dirty transmission fluid
  5. Failed transmission control module (TCM)

How to diagnose & fix

Work through it in order

  1. Inspect and wiggle-test the shift solenoid G connector and harness for intermittent contact.
  2. Check transmission fluid level and condition; look for debris in the pan.
  3. Measure solenoid G resistance and compare to spec.
  4. Clear the code and road-test to confirm whether it returns.
  5. Replace the solenoid if faulty; evaluate the TCM only after wiring and solenoid check out.

FAQ

Quick answers

Is it safe to drive with P075E?+
For short trips, usually yes, but expect rough shifting and possible limp mode. Repair it promptly to avoid extra transmission wear.
Can I just clear P075E?+
You can, but an intermittent fault comes back until the connector, wiring, or solenoid is repaired.

Related codes

Often seen with P075E

Read & clear P075E yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX