DOBD DashX ☰ Browse all codes
P070F

Transmission Fluid Level Too Low

Transmission Generic OBD-II High

What it means

P070F means the transmission fluid level is below the required amount — usually from a leak or a missed top-up. Low fluid starves the transmission of the pressure and cooling it needs, causing slipping, harsh shifts, and overheating that can quickly turn into costly internal damage if ignored.

High

Can I keep driving? Don't keep driving — running a transmission low on fluid causes slipping and overheating that can permanently damage it. Check and top up before driving on.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Low transmission fluid from a leak (pan gasket, seals, cooler lines)
  2. Fluid never topped up after a previous service
  3. Faulty transmission fluid level or temperature sensor reading low
  4. Overheating boiling off / expanding fluid past the correct level

How to diagnose & fix

Work through it in order

  1. Check the transmission fluid level and condition using the correct procedure for your vehicle.
  2. Inspect underneath for leaks at the pan, seals, and cooler lines.
  3. Top up with the exact specified fluid to the correct level.
  4. Repair any leak found so the level stays correct.
  5. If the level is actually fine, test the fluid level/temperature sensor and wiring. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P070F?+
No. A transmission low on fluid overheats and slips, which can cause expensive internal damage. Check and correct the fluid level before driving further.
Can I just clear P070F?+
Clearing it without adding fluid or fixing the leak just hides a problem that damages the transmission. Address the fluid level first.

Related codes

Often seen with P070F

Read & clear P070F yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX