DOBD DashX ☰ Browse all codes
P0682

Cylinder 12 Glow Plug Circuit/Open

Glow plugs (diesel) Generic OBD-II High

What it means

P0682 is a diesel code meaning the control module detected an open (broken) circuit for cylinder 12's glow plug. Glow plugs preheat the combustion chamber for cold starting, so a failed plug or broken wire here shows up mainly as hard cold starts and rough running until the engine warms.

High

Can I keep driving? Usually driveable, but expect hard cold starts and rough cold running; a warm diesel will normally still run on the remaining cylinders.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Failed cylinder 12 glow plug (open circuit)
  2. Open or broken wiring in the cylinder 12 glow plug circuit
  3. Loose or corroded electrical connector at the glow plug
  4. Faulty glow plug control module

How to diagnose & fix

Work through it in order

  1. Scan and confirm the code is for cylinder 12, and read freeze-frame data.
  2. Inspect the cylinder 12 glow plug wiring and connector for an open, breakage, or corrosion.
  3. Measure the glow plug's resistance; an open (infinite) reading means the plug has failed — replace it.
  4. Verify the glow plug control module is powering the circuit before replacing it.
  5. Repair, clear the code, and do a cold start to confirm the fix.

FAQ

Quick answers

Is it safe to drive with P0682?+
Usually yes once running, but expect hard cold starts and rough warm-up. Repair it before cold weather to avoid no-starts.
Can I just clear P0682?+
It returns on the next cold start until the failed glow plug or open circuit is repaired. Clearing only resets the light.

Related codes

Often seen with P0682

Read & clear P0682 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX