DOBD DashX ☰ Browse all codes
P0675

Cylinder 5 Glow Plug Circuit/Open

Glow plug / diesel preheat Generic OBD-II High

What it means

P0675 is a diesel code meaning the control module detected an open (broken) circuit for cylinder 5's glow plug — most often a burned-out plug or broken wiring. Glow plugs preheat the cylinder for starting, so the main symptoms are hard cold starts and rough, smoky running until the engine reaches temperature.

High

Can I keep driving? Usually drivable — expect hard cold starts and rough, smoky running until warm; a single open glow plug rarely stops the engine from starting.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Failed cylinder 5 glow plug (open circuit)
  2. Open or broken wiring in the cylinder 5 glow plug circuit
  3. Loose or corroded electrical connection
  4. Faulty glow plug control module

How to diagnose & fix

Work through it in order

  1. Scan and confirm the code, and check whether other cylinders have glow-plug codes too.
  2. Inspect the wiring and connector to the cylinder 5 glow plug for breaks or corrosion.
  3. Measure the glow plug's resistance; an open (infinite) reading means it has failed and needs replacing.
  4. If the plug and wiring test good, check the control module's output and feeds. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0675?+
Usually yes, but cold starts will be harder and the engine may run rough and smoky when cold. Repair it before cold weather makes starting worse.
Can I just clear P0675?+
It returns once the module re-tests the circuit. The open plug or wiring needs to be repaired for the code to stay off.

Related codes

Often seen with P0675

Read & clear P0675 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX