P060E
Internal Control Module Throttle Position Performance
ECM / internal performance
Generic OBD-II
High
What it means
P060E means the engine control module's internal performance check for the throttle-position function has failed — the ECM isn't processing the throttle signal the way it expects to. Because throttle control is safety-related, the vehicle may drop into a reduced-power or limp mode. It usually still starts, but performance can be limited.
High
Can I keep driving? Get it diagnosed soon — the ECM's internal throttle-position check has failed, which can trigger reduced-power (limp) mode; drive gently until it's fixed.
Common symptoms
What you'll notice
- Check-engine light on
- Reduced engine power or limp mode
- Poor throttle response or hesitation
Common causes
Most likely first
- Related throttle-position (TPS) or accelerator-pedal (APP) circuit faults or wiringLikely
- Poor power or ground connections at the ECMCommon
- Software or calibration issue in the ECMCommon
- Internal ECM failureLess often
How to diagnose & fix
Work through it in order
- Scan for companion TPS/APP codes (such as P0121 or P2135) and repair those first.
- Inspect the ECM's power and ground circuits and connectors.
- Check for a manufacturer software update and reflash the ECM if one applies.
- Replace or reprogram the ECM only if all inputs, wiring, and grounds check good.
- Clear the code and road-test to confirm normal throttle response.
FAQ
Quick answers
Is it safe to drive with P060E?+
Drive gently and get it diagnosed soon — the vehicle may limit power for safety since throttle control is involved.
Can I just clear P060E?+
It typically returns until the throttle-position fault or the internal ECM issue is resolved.
Related codes
Often seen with P060E
Read & clear P060E yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX